Single Section Ladders & Industrial Singles

Industrial Single Ladders

Intended for rugged industrial and contracting use.
Furnished with tapered side rails - Model T - or flared base - Model F - at the same low cost.
BOX GIRDER side rails for the utmost in rigidity and side sway stability.
Heavy wall 1,000 - lb. test corrugated round rungs.
Slip resistant end plugs used on all side rails.
Side rail dimensions increase with length
Parallel single ladders also available in Type 1A, 300 - lb. rating.
Meets or exceeds applicable load and design requirements as specified by ANSI and recommended by OSHA.

MODEL T & F INDUSTRIAL & HEAVY DUTY SINGLES Type 1 Industrial Ladder - 250 lb. Rated
Length Model #	Siderail		C'	D'	E"	F"	Wt.
Length Model #	A"	B"	C'	D'	E"	F"	Wt.
-10	2-1/2	1	14	16-1/2	16	17-1/2	15
-12	2-1/2	1	14	17	16	18-1/2	18
-14	2-1/2	1	14	17-1/2	16	19	21
-16	2-1/2	1	14	18	16	19	24
-18	2-1/2	1	14	18-1/2	16	19-1/2	27
-20	3-1/8	1	14	19	16	20	33
-22	3-1/8	1	14	19-1/2	16	20	36
-24	3-1/8	1	14	20	16	20-1/2	39
-26	3-1/2	1-1/8	14	21	18	23	49
-28	3-1/2	1-1/8	14	21	18	23	49
-30	3-1/2	1-1/8	14	21-1/2	18	23-1/2	53

Meets or exceeds applicable load and design requirements as specified by ANSI and recommended by OSHA.

Available for all Metallic extension, single, and sectional ladders.

Manhole - Model MT.
Available in various lengths up to 20 feet.
BOX GIRDER 2-1/2" x 1" side rails for the utmost in rigidity and side sway stability.
Heavy wall 1,000 - lb. test corrugated round rungs.
Slip resistant end plugs used on all side rails.
Standard widths are 12" and 18" OD.
Other widths available upon request.
Weight is approximately 1-1/2 lbs. per foot.
Type 1 provides a 250 - lb. rating.
Type 1A provides a 300 - lb. rating
Meets ANSI 14.2 standards for special purpose ladders.